"II. Connecting the Speaker System"

Chapter Summary:

I...Powering the Transmitter... Connect the small, round plug from the transmitter AC power adapter (M) to the transmitter power input jack (I) and plug the other end of the transmitter AC power adapter (M) into any standard 120V AC wall outlet...... Transmitter... AC Power Adapter (M... 120V AC wall outlet... Be sure to use the AC power... adapter rated 12V DC 100 mA...... There is no transmitter ON/OFF...

sometimes be heard...If this occurs, confirm the transmitter/speaker adjustments and indicators...If the problem persists, refer to the Troubleshooting section of this manual......

1...The power/tuning indicator light (A) will illuminate red until the speaker is tuned to the transmitter and then the light will illuminate green, indicating that the speaker is tuned properly...You should hear sound coming from the speaker now...

2...Adjust the volume on the speaker as desired......

3...For monaural operation, set the left/mono/right switch (D) to “MONO” on each speaker...For stereo operation, set the left/mono/right switch (D) to “L” on the speaker located to the left from the listener, and set the other speaker to the “R” position......

If the speaker is not tuned or if the transmitter is not connected...

This "User Guide" also applies to the following products: