Instruction Manual for Canon 10D:
Installing and Removing the CF Card
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
The captured image will be recorded onto the CF card (optional...The camera is compatible with Type I and Type II CompactFlash (CF) cards......
Installing a CF Card...
Open the cover...
Slide the cover in the direction shown by the arrow, and open it......
Insert the CF card......
mark Label side...
Using CF cards made by Canon is recommended...With the CF card label side (the side with the printed mark) facing toward the rear of the camera, slide the card in the direction of the mark, into the slot......
 |
Instruction Manual for Canon 10DUsers also looked at:
power outlet......
Carefully insert the cord into the groove without damaging it......
4Connect the power cord......
Connect the DC Coupler’s plug to the AC adapter’s socket......
Connect the power cord to the AC adapter...Plug the cord into a power outlet......
Connect the DC Coupler......
Open the cover and lower the covering on the cord hole...Check that the cord is placed tightly in the cord hole, and slide the DC coupler into the compart- ment until it locks into place...Push down the cover until it clicks......
Insert the DC coupler into the camera......
Do not connect or disconnect the power cord while the camera's < > switch is set to...Do not use the DC coupler with any camera other than the EOS 10D, D60, and D30......
With AC Adapter Kit ACK-E2 (optional), you can connect the camera to a household power outlet...Then you do not have to worry about exhausting the battery while using the camera......
When you are finished, remove the plug from the...
Place the cord in the groove......
stands for Program...
|