Instruction Manual for Canon 10D:
Main Switch
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
The camera operates only after the < > switch is set to......
Set to this position when the camera is in use...The camera does not operate...Set to this position when not using the camera......
To save battery power, the camera turns off automatically after 1 minute of non- operation (auto power off / →p.142...To turn on the camera again, just press the shutter button halfway...Immediately after shooting, if you turn the < > switch to < >, the access lamp...
 |
Instruction Manual for Canon 10DUsers also looked at:
LCD panel illumination is provided...The illumination stays on for 6 sec...If you take a bulb exposure while the panel is illuminated, the illumination will turn off immediately......
The illumination will remain on if you press any button for shooting or the Mode dial......
The EOS 10D can take easy, natural-looking flash shots with correct subject illumination using E-TTL autoflash (preflash evaluative metering in memory) using either the camera’s built-in flash or any EOS-dedicated EX-series Speedlite...This chapter explains how to take flash shots with the built-in flash and EOS-dedicated Speedlite 550EX...For details on Speedlite 550EX, see the 550EX Instructions booklet......
The image could not be magnified because it was captured by another camera or it is in an incompatible format or it has been edited with a personal computer......
Turn off the printer and turn it back on...If the error is still displayed, consult your nearest BJ printer service center (see the service center list in the printer’s manual......
|