Instruction Manual for Canon 10D:
Setting Procedure
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
Display the menu......
Press the < > button to display the menu...To turn off the menu, press the button again......
2Select a menu item......
dial to select the item, then press...
The selection goes up...
The selection goes down...
Select the desired setting......
Turn the < > dial to select the desired setting......
Set the desired setting......
Press......
5Exit the menu.> button to exit......
Press the...
 |
Instruction Manual for Canon 10DUsers also looked at:
If the shutter speed indicator blinks, the shutter speed may be too slow to keep the image from being blurred by camera shake...Be careful to hold the camera steady and press the shutter button smoothly, or use a tripod...The shutter speed indicator still blinks when you use a tripod, but camera shake will not be a problem.) In the < > mode, use a tripod to prevent camera shake......
You can disable the flash when you do not want it to fire...The built-in flash or any external Speedlite will not fire...The < > AF mode, < > (single) drive mode, < > metering mode, “ ” ISO speed, and < > white balance will be set automatically......
As long as the exposure setting is not blinking, a proper exposure will be obtained...Compose the shot and press the shutter button fully...In the sample image shown in step 2, all three people will be in sharp focus even though they are at different distances from the camera......
|