Instruction Manual for Canon 10D:
Reverting to the Default Settings
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
On the menu, select [Clear settings......
Press the < > button...Turn the < > dial to select [Clear settings], then press......
Select [Clear all camera settings......
Turn the < > dial to select [Clear all camera...settings], then press...
Clear the settings......
Turn the < > dial to select [OK], then press...Press the < > button to turn off the LCD monitor and exit the menu......
s The camera’s default settings will be as shown...
 |
Instruction Manual for Canon 10DUsers also looked at:
Resuming the Printing...
Images taken with [Adobe RGB] (→p.58) set as the color space will have low color saturation when printed directly from the camera with a BJ printer...In step 4, the [Style] screen’s [Date] option cannot be set...If [Print Type] has been set to...
step 3 abov...
When the pre......
upper right...If the settings are okay, go to step 5......
Printing cannot be resumed in the following cases...
Handling Errors (→p.126...
Before resuming the printing, you changed the printing options...Before resuming the printing, you erased an image that was to be printed...When you stopped the printing, CF card’s remaining capacity was low......
stop the printing.(→p.126) inting ends, the screen will return to...
Direct Printing with DPOF...
If [Print TOn].] is set to [Standard], the file No...will not be imprinted even if [File No...
On the direct printing screen, after printing is stopped, turn the...
|