Instruction Manual for Canon 10D:
Flash off
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
You can disable the flash when you do not want it to fire...The built-in flash or any external Speedlite will not fire...The < > AF mode, < > (single) drive mode, < > metering mode, “ ” ISO speed, and < > white balance will be set automatically......
If the shutter speed indicator blinks, the shutter speed may be too slow to keep the image from being blurred by camera shake...Be careful to hold the camera steady and press the shutter button smoothly, or use a tripod...The shutter speed indicator still blinks when you use a tripod, but camera shake will not be a problem.) In the < > mode, use a tripod to prevent camera shake......
 |
Instruction Manual for Canon 10DUsers also looked at:
Under low-light conditions, the built-in flash fires a brief burst of flashes when you press the shutter button halfway...This is to illuminate the subject to enable easier autofocusing...
modes......
In the Creative Zone modes when the buit-in flash is popped up with the < > button...
The AF-assist beam does not function in the < • The built-in flash’s AF-assist beam is effective up to about 4 meters/13.2 feet......
the AF-assist beam may be emitted......
This vertical image was taken while the camera grip was pointing downward...It has been rotated by 90......
the image will rotate clockwise by 90˚, 270˚, and 0...To quit the image rotation, press the < > button...The menu will reappear......
The Rotate function can rotate an image 90° or 270˚ clockwise...This allows you to play images with the correct orientation......
Rotate the image......
If the shot was taken vertically with the camera grip pointing downward or upward, rotate the image by 90˚ or 270˚ respectively to display it upright...If you have set [Auto rotate] to [On] (→p.61) on the menu before taking vertical shots, you need not rotate the image as above...Image rotation is also possible during image with shooting information display and magnified view......
On the menu, select [Rotate......
This vertical image was taken while the camera grip was pointing upward...It has been rotated by 270......
|