Instruction Manual for Canon 10D:
Processing
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
Processing is the alteration of the raw image data captured with the camera’s CMOS image sensor...images are processed according to the white balance and processing parameters set at the time of shooting......
Image File Size and CF Card Capacity According to Image- Recording Quality...
Compression Image File Size Max...Capacity Rate (Approx.) (Approx...
Image Size (Pixels...
Format...
Low 2.4 MB 50 images...
 |
Instruction Manual for Canon 10DUsers also looked at:
1/3-stop increments...
Aperture value readout...
Shutter speed Aperture value...
The shutter speed is normally displayed in 1/2-stop increments...Numbers from “ ” to “ ” denote the denominator of the shutter speed fraction: for example, “ ” is 1/125 seconds...In addition, “ ” is 0.3 seconds, and “ ” is 15 seconds......
Shutter speed readout...
The aperture value is normally displayed in 1/2-stop increments...The larger the number, the smaller the aperture opening...The range of aperture values (f/numbers) displayed depends on the lens used......
1/2-stop increments...
C.Fn-06-1, the shutter speed and aperture value can be set in 1/3-stop increments...p.122...
If the camera is set to the wrong video system format (→p.144), you will not see a proper image on the TV set...Make sure the camera is set to the video system format (NTSC or PAL) compatible with the TV set...Depending on the TV monitor, the image periphery may appear dark similar to mirror cut-off......
|