Instruction Manual for Canon 10D:
Simultaneous Capture in RAW and JPEG Formats
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
In the < > image-recording quality mode, a JPEG image is recorded simultaneously and embedded within the RAW image file...With C.Fn-08 [RAW+JPEG rec.], you can set the image- recording quality of this JPEG image...To extract the JPEG image embedded in the RAW image file, you will need the dedicated software......
On the menu, select [Custom Functions (C.Fn......
Press the < > button...Turn the < > dial to select [Custom Functions (C.Fn)], then press......
 |
Instruction Manual for Canon 10DUsers also looked at:
In this shooting mode, you cannot freely change the shutter speed and aperture...Regardless of the AF mode setting, ONE-SHOT AF will take effect...If you use a flash, the result will be the same as using < > (Program AE) mode with flash......
pressing the shutter button halfway, you can see the depth of field...p.85...
The < > mode cannot be used if the lens’ focus mode switch is set to < MF > (or < M > on older lenses...If the aperture value blinks, it indicates that the exposure level is correct but the desired depth of field cannot be achieved...Either use a wide-angle lens or move further away from the subjects......
As long as the exposure setting is not blinking, a proper exposure will be obtained...Compose the shot and press the shutter button fully...In the sample image shown in step 2, all three people will be in sharp focus even though they are at different distances from the camera......
This mode is for obtaining a wide depth of field automatically between a near subject and far subject...It is effective for group photos and landscapes...The camera uses the seven AF points to detect the nearest and farthest subjects to be in focus......
|