Instruction Manual for Canon 10D:
White Balance Auto Bracketing
This document also applies to:
Chapter Summary:
With just one shot, three images having a different color temperature can be recorded simultaneously...One stop is equivalent to 5 Mireds of a color conversion filter...The images are assigned a file number and recorded in the CF card......
Set the image-recording quality to any...
setting except [RAW...p.46...
On the menu, select [WB-BKT......
button...dial to select [WB-BKT], then press...
Standard setting...
|
|
Instruction Manual for Canon 10D
Users also looked at:
Manual selection Auto selection...
AE lock applied to the metered value at the active AF point......
AF point selection Metering method...
AE lock applied to the metered value at the selected AF point......
AE lock applied to the metered value at the center AF point......
when using a mode in the Creative zone...
Partial metering Center-weighted average...
The figures above are based on Canon’s standard testing conditions (w/fully charged battery, EF 50mm f/1.4 USM lens, image review [ON], review time of [2 sec.], and image quality at [Large...
Slide the battery lock lever in the direction shown by the arrow, and remove the battery......
Removing the Battery...
Normal (20°C/68°F) Low (0°C/32°F...
The level of charge remaining is shown in three stages when the < (→p.30...
Battery pack must be recharged......
Remove the battery pack......
|
This "Instruction Manual" also applies to the following products:
