Instruction Manual for Canon 10D:
Setting Processing Parameters
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
The image you capture can be processed automatically by the camera in accordance with the parameter settings you set (five settings each for [Contrast], [Sharpness], [Saturation], and [Color tone...You can register and save up to three sets of processing parameters...By selecting [Standard], all the parameter settings will be reset to [0......
Settings...
Parameter Setting Level Settings...
Low contrast –1 / –2...
 |
Instruction Manual for Canon 10DUsers also looked at:
To pause the auto play, press...Press < play...To quit the auto play, press the < > button......
Start the auto play......
During auto play pause, you can turn the < > dial to display another image......
This function automatically and continuously displays all images recorded on the CF card...Each image is displayed for approximately 3 seconds......
2• After the images load for 2 sec., auto play will start......
On the menu, select [Auto Play......
button...dial to select [Auto Play......
During auto play, auto power off will not work...142) After you finish viewing the > button to quit the auto play...images, press the < The display time may vary depending on the image......
Press the < Turn the...
When using the built-in flash, detach any hood attahed to the lens...A lens hood will...
Flash Sync Speed and Aperture Settings...
|