Instruction Manual for Canon 10D:
Selecting Adobe RGB
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
Select Adobe RGB if you want to use a personal computer to adjust the color saturation or if the image will be used for commercial printing with Adobe RGB......
With step 2 above, select [Adobe RGB...The image will be recorded with Adobe RGB......
When Adobe RGB has been set, the processing parameters cannot be set...To convert the profile, Adobe RGB must be specified...The chroma must therefore be adjusted beforehand......
 |
Instruction Manual for Canon 10DUsers also looked at:
dial will set the white balance...p.50) In step 4, turning the...
While looking at the LCD panel, turn the < to select the desired AF mode......
Select the AF mode......
Set the lens focus mode switch to < AF......
dial...
Selecting AF Mode...
To return to shooting, press the shutter button halfway......
Turn the Mode dial to a Creative Zone mode......
The AF mode is the autofocusing method...One Shot AF for still subjects, 2...AI Focus AF that switches automatically from One-Shot AF to AI Servo AF if the subject starts to move......
One Shot AF AI Focus AF AI Servo AF...
s During the AEB shooting, the...
decreased exposure...
s The respective bracketing amount will be displayed...
increased exposure...
Follow steps 1 and 2 to set the AEB amount to...AEB will also be canceled automatically if you turn the < > switch to < >, change lenses, have flash-ready, replace the battery, or replace the CF card......
|