Instruction Manual for Canon 10D:
Setting Auto Rotation
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
During playback, vertical images can be displayed vertically after being rotated clockwise by 90˚ or 270˚ automatically......
On the menu, select [Auto rotate......
Press the < > button...Turn the < > dial to select [Auto rotate], then...press...
Set the Auto rotate setting......
u will...
Turn the < > dial to select [On], then press......
s When the setting is completed, the men...
reappear...Press the < > button to exit the menu and turn...
 |
Instruction Manual for Canon 10DUsers also looked at:
Shutter speed readout...
C.Fn-06-1, the shutter speed and aperture value can be set in 1/3-stop increments...p.122...
1/2-stop increments...
1/3-stop increments...
Aperture value readout...
The shutter speed is normally displayed in 1/2-stop increments...Numbers from “ ” to “ ” denote the denominator of the shutter speed fraction: for example, “ ” is 1/125 seconds...In addition, “ ” is 0.3 seconds, and “ ” is 15 seconds......
Shutter speed Aperture value...
The aperture value is normally displayed in 1/2-stop increments...The larger the number, the smaller the aperture opening...The range of aperture values (f/numbers) displayed depends on the lens used......
Telephoto: 85 mm...
E-TTL is an abbreviation for Evaluative-Through-The-Lens...AF flash exposure is always based on the aperture value at the time the shot is taken, and controlled by E-TTL autoflash linked to the active AF point and weighted for the main subject...If the camera finds it difficult to focus, the AF-assist lamp (→p.39) will light automati- cally (except......
|