Instruction Manual for Canon 10D:
Selecting AF Mode
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
The AF mode is the autofocusing method...One Shot AF for still subjects, 2...AI Focus AF that switches automatically from One-Shot AF to AI Servo AF if the subject starts to move......
Set the lens focus mode switch to < AF......
Turn the Mode dial to a Creative Zone mode......
Select the AF mode......
While looking at the LCD panel, turn the < to select the desired AF mode......
dial...
One Shot AF AI Focus AF AI Servo AF...
 |
Instruction Manual for Canon 10DUsers also looked at:
Close the cover...
Battery Life...
The number of shots may be less than indicated in some cases, due to differences in operating conditions...Holding the shutter button halfway down for long periods to use the AF function without taking a shot can reduce the number of shots...Regarding the battery life (number of shots) with Battery Grip BG-ED3 (optional), refer to the BG-ED3’s instructions......
Removing the Battery...
Shooting conditions No flash use 50% flash use Approx...500 Approx...400...
Charge is sufficient...Charge is low......
Battery pack must be recharged......
Installing and Removing the Battery...
Temperature...
The level of charge remaining is shown in three stages when the < (→p.30...
Remove the battery pack......
Normal (20°C/68°F) Low (0°C/32°F...
The figures above are based on Canon’s standard testing conditions (w/fully charged battery, EF 50mm f/1.4 USM lens, image review [ON], review time of [2 sec.], and image quality at [Large...
|