Instruction Manual for Canon 10D:
Basic Procedure for AF Point Selection
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
After pressing the < > button, look at the > or viewfinder or LCD panel and turn the < < > dial to select the desired AF point......
Selecting a horizontal AF point...
Shifts horizontally...
Shifts vertically...
button and turn the < > dial......
s The selected AF point will shift horizontally......
Selecting a vertical AF point...
s The selected AF point will shift vertically......
To return to shooting, press the shutter button > button again...halfway or press the...
 |
Instruction Manual for Canon 10DUsers also looked at:
This function corrects the flash level in much the same way as the Exposure compensation function...The level of compensation can be up to +/–2 stops in 1/2-stop increments......
The built-in flash lets you take the following kinds of flash shots with the ease of a normal AE shot......
FE (flash exposure) lock sets the correct flash exposure for a selected part of the subject...The FE lock functions as an AE lock with flash......
With E-TTL autoflash (preflash evaluative metering), optimum flash exposure is obtained for the subject in focus...In the aperture-priority AE mode, a slow sync speed is set automatically in low-light situations to obtain a natural-looking, balanced exposure between the subject and background......
E-TTL autoflash...
FE (Flash Exposure) Lock...
Sets the date and time...Also sets the display format of the date and time...p.154...
Images in the CF card can be selected for printing and the printing quantity can also be specified...When this command is given, the DPOF print order information will be saved in the CF card...p.131...
|