Instruction Manual for Canon 10D:
Selecting the Metering Mode
This document also applies to:
Chapter Summary:
The EOS 10D uses three modes for metering: Evaluative, Partial, and Center-weighted average...The Basic Zone uses evaluative metering...In the Creative zone, any of the three modes can be selected......
Select a metering mode......
While looking at the LCD panel, turn the < to set the desired metering mode......
Evaluative...
Partial...
Center-weighted average...
Press the shutter button down halfway to return to...
|
|
Instruction Manual for Canon 10D
Users also looked at:
Battery Life...
Charge is sufficient...Charge is low......
Slide the battery lock lever in the direction shown by the arrow, and remove the battery......
The figures above are based on Canon’s standard testing conditions (w/fully charged battery, EF 50mm f/1.4 USM lens, image review [ON], review time of [2 sec.], and image quality at [Large...
Remove the battery pack......
Shooting conditions No flash use 50% flash use Approx...500 Approx...400...
Battery pack must be recharged......
Installing and Removing the Battery...
The number of shots may be less than indicated in some cases, due to differences in operating conditions...Holding the shutter button halfway down for long periods to use the AF function without taking a shot can reduce the number of shots...Regarding the battery life (number of shots) with Battery Grip BG-ED3 (optional), refer to the BG-ED3’s instructions......
|
This "Instruction Manual" also applies to the following products:
