Instruction Manual for Canon 10D:
Evaluative Metering
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
This is an all-around metering mode suited even for backlit subjects...The viewfinder is divided into 35 metering zones to which all the AF points are linked for evaluative metering...After detecting the main subject’s position, brightness, background, front and back lighting conditions, camera orientation (horizontal or vertical), etc., the camera sets the proper exposure......
During manual focusing, evaluative metering is...
 |
Instruction Manual for Canon 10DUsers also looked at:
Flash exposure compensation can also be set with certain EX-series Speedlites...If flash exposure compensation is set with both the Speedlite and camera, the Speedlite’s flash exposure compensation setting will override the camera's......
For flash shots with flash exposure compensation, see “Flash Exposure Compensation” for the built-in flash...p.101...
To prevent the < > dial from turning inadvertently and changing the exposure compensation amount, set the < > switch to......
Press the shutter button halfway and check the exposure level indicator......
Focus the subject and check the expo- sure level......
Decreased exposure...
The exposure compensation amount will remain in effect even after you turn the < > switch to...If the standard exposure setting is 1/125 sec...and f/5.6, setting the exposure compen- sation amount to plus or minus one stop will be the same as setting the shutter speed or aperture as follows...
|