Instruction Manual for Canon 10D:
Using the Eyepiece Cover
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
During self-timer or remote control operation when your eye does not cover the viewfinder eyepiece, stray light may enter the eyepiece and affect the exposure when the image is captured...To prevent this, use the eyepiece cover (attached to the neck strap) to cover the eyepiece......
Remove the eyecup......
Grasp both sides of the eyecup and slide it up to remove......
Attach the eyepiece cover......
Slide the eyepiece cover down into the eyepiece groove to attach it......
 |
Instruction Manual for Canon 10DUsers also looked at:
s After the setting is completed, the menu will...
Follow steps 2 and 3 to set the bracketing amount to < >, then press...You can also set the < > switch to < > to cancel white balance bracketing......
3 steps...
Bracketing amount...
With just one shot, three images having a different color temperature can be recorded simultaneously...One stop is equivalent to 5 Mireds of a color conversion filter...The images are assigned a file number and recorded in the CF card......
s The number of remaining shots displayed on the...
s With a single shot, three images, each having a...
With C.Fn-9-2/3, you can change the white balance bracketing sequence...p.148) • C.Fn-9-1/3, prevents the white balance bracketing from being canceled after the...
color temperature followed by a bluish tone (decreased compensation) and reddish tone (increased compensation...p.76) During continuous shooting, the number of images recorded will be three times as many as the number of shots taken...Since three images are recorded for one shot, the CF card will take longer to record the shot......
|