Instruction Manual for Canon 10D:
Program AE
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
Like < > (Full Auto) mode, this is a general-purpose shooting mode...The camera automatically sets the shutter speed and aperture value to suit the scene’s brightness...This is called Program AE......
stands for Program...
AE stands for Auto Exposure...
Set the Mode Dial to......
s The exposure setting will be displayed in the...
viewfinder and on the LCD panel...See “When Autofocus Fails” (→p.71...When the CF card is almost full and only nine or ” to “ ” will be fewer shots can be taken, “ displayed to indicate the remaining number of shots......
 |
Instruction Manual for Canon 10DUsers also looked at:
The date recorded for the image will be imprinted...On...
button...The print order screen will...
Press the < reappear......
The images are made smaller to be printed as index images on the paper...Index...
Turn the < > dial to select [Print Type], [Date], or...File No.], then press...
The print will not have a date imprinted...Off...
The file No...is also imprinted on the print...On...
Select [Standard], [Index], or [Both......
s The set up screen will appear......
Select the set up option......
The imprinted date will be the date set with the menu’s [Date/time] setting...p.154...
Prints one image on the paper...Standard...
Prints both the standard and index prints...Both...
Select [On] or [Off......
If [Print Type] has been set to [Index], the [Date] and [File No.] cannot both be set to...
On] at the same time......
Exit the set up screen......
On] at the same time...However, the index print will only have the File No...imprinted......
The [Set up] options are as follows...
Print Type...
The file No...is not imprinted on the print...Off...
Set the set up option......
Select [Set up......
If [Print Type] has been set to [Both], the [Date] and [File No.] can both be set to...
|