User Guide for Canon D60:
INFO. Checking Camera Settings
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
When the camera is ready to shoot, press the < INFO.> button to view the current camera settings on the LCD monitor......
Camera Setting Information...
Auto power off time (→29, 120...
Review (→41), Review time (→42...
Parameters (→52...
C.Fn (Custom Function) number(s) (→122...
AEB (→78...
Flash exposure compensation (→91...
ISO speed (→51...
CF card capacity remaining (→50...
Shots remaining...
Display the camera settings......
 |
User Guide for Canon D60Users also looked at:
When charging is complete, the lamp stops...
The battery pack can operate in temperatures from 0°C to 40°C (32°F to...
mark...
right side of the adapter......
To protect battery packs and prevent loss of capacity, do not charge them...
Charge lamp...
If you remove the battery from the camera...
continuously for more than 24 hours......
Battery charge...
first battery pack attached...After that battery pack is charged, the charge lamp goes on and the adapter starts charging the second battery pack...After charging of both battery packs is completed (both charge lamps are on), leave both battery packs in the charger for two more hours (one hour per battery pack) to reach a full charge......
the compact power adapter, the charge lamp starts blinking and charging begins......
icon on the LCD panel blinks...Remove the battery pack from the camera and charge it......
|