User Guide for Canon D60:
LCD Panel Illumination
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
The LCD panel can be illuminated for about 4 sec...Pressing the button again turns off the illumination...After a picture is taken, the LCD panel illumination turns off automatically after 2 sec......
On the menu, select [LCD illumi.] and set the LCD panel illumina- tion......
Press the < MENU> button......
dial to select [LCD illumi...
...then press...
dial to select [On], then...press...
The LCD panel illumination will be enabled...
 |
User Guide for Canon D60Users also looked at:
Grasp both sides of the eyecup and lift it up...
If you take a picture using the self-timer or remote switch (optional) without looking through the viewfinder, stray light can enter the eyepiece and affect the exposure...To prevent this, attach the eyepiece cover to the viewfinder eyepiece before taking the picture......
Remove the eyecup......
Slip the eyepiece cover over the eyepiece......
The eyepiece cover is attached to the strap......
and away from the camera......
Partial...
The EOS D60 uses three modes for metering: Evaluative, Partial, and Center-weighted average...The Basic Zone uses evaluative metering...In the Creative zone, any of the three modes can be selected......
Select a metering mode......
Set the review time......
1) This camera is a precision instrument...6) Use a commercially available blower brush to remove any dust that accumulates on the camera lens, viewfinder, mirror, or focusing screen...If you have not used the camera for some time or are planning to take shots you will not want to lose (overseas vacation, etc.), have the camera checked by your Canon dealer beforehand, or check for yourself that the camera components are working properly......
|