User Guide for Canon D60:
Program AE
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
Like < > (Full Auto) mode, this is a general- purpose picture-taking mode...The camera automati- cally sets the shutter speed and aperture value to suit the scene’s brightness...This is called Program AE......
stands for Program...
AE stands for Auto Exposure...
Set the Mode Dial to...
Press the shutter button down halfway...The AF point achieving focus will flash in...
The shutter speed and aperture value are...
 |
User Guide for Canon D60Users also looked at:
The Print Order Setting screen appears......
Standard...
Print Order screen......
dial to select the print type, then press the < > button......
You can specify the following print types......
Prints an index of the images in reduced size, on one sheet......
Turn the < > dial to select [Set up], then press the < > button......
Turn the < > dial to select [Print > button...Type], then press the...
Both...
Prints the individual images and an index sheet......
Follow steps 1 and 2 of the Select- ing a Single Image procedure...
Prints one image to each sheet......
Select the print type......
cally......
If the aperture value is not blinking, the...
minimum aperture) for the lens you are using blinks, the scene is too bright...Turn > dial to a faster shutter speed the < until the aperture value stops blinking......
If the smallest aperture value (the...
|