User Guide for Canon D60:
Manual Exposure
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
In this mode you set the shutter speed and aperture value yourself...The camera makes no settings automatically...You can determine the correct combination of shutter speed and aperture value by checking the exposure level displayed in the camera......
stands for manual......
Set the aperture value......
Set the Quick Control Dial switch to < ON...
then turn the < > dial......
Press the shutter button down halfway......
 |
User Guide for Canon D60Users also looked at:
on the review time setting...42...
You can change the review time setting...42...
was shot appears on the LCD monitor......
The setting is entered, and the display...
Histogram (→100...
dial to select the desired > button...option, then press the...
dial to select [Review], then...
The time that image is displayed depends...
On] selected...
you selected [On] or [On (Info......
On (Info)] selected (→100...
The display differs depending on whether...
Select the Review setting......
Image information (→100) Date/time (→34...
You can set the camera to display each image on the LCD monitor as soon as it is taken...Select [Off] if you do not want to display the image...The default setting is [On......
button...press the...
From the Menu, select [Review......
or < > mode, if you set the shutter speed faster than 1/200 second, the camera will automatically reset it to 1/200 unless the EX-series Speedlite has been set for high-speed sync......
|