User Guide for Canon D60:
Autoexposure Bracketing
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
When using autoexposure bracketing, the camera automatically changes the exposure level within the set range (up to +/– 2 stops in 1/2-stop increments) for three successive frames...This is called AEB (Auto Exposure Bracketing...The three bracketed shots are exposed in the selected drive mode (→63) in the following order: correct exposure, decreased exposure, and increased exposure......
Standard exposure (0) Decreased exposure (–1.0) Increased exposure (+1.0...
 |
User Guide for Canon D60Users also looked at:
button again to clear the LCD monitor and exit PLAY......
The most recent single image taken by the...
dial counterclockwise to view images in order from newest to oldest...dial clockwise to view...
camera appears......
images in order from oldest to newest......
Set the date and time......
returns to the menu......
date and time are not set, they cannot be recorded correctly...Make sure you set the date and time correctly......
Select the order for the display......
From the Menu, select [Date/ Time......
dial to select the order, then > button...press the...
item......
dial to cycle through the selections in the order shown......
The date and time are set, and the display...
Press the < > button......
screen and exit the menu......
After entering the setting, go to the next...
yy/mm/dd...
Setting the Date and Time...
Use the...
Turn the...
mm/dd/yy...
dial to adjust the date or > button...time values, then press the...
dd/mm/yy...
Each photographed image is recorded with the date and time it was taken...If the...
|