User Guide for Canon D60:
Using the Built-in Flash
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
The built-in flash lets you take the following kinds of flash pictures with the ease of a normal AE shot......
E-TTL autoflash...
E-TTL autoflash (preflash evaluative metering in memory) supplies the correct level of flash for the subject in the AF point selected by AF......
FE (Flash Exposure) lock (→90...
FE (flash exposure) lock sets the correct flash exposure for a selected part of the subject...The FE lock functions as an AE lock with flash......
 |
User Guide for Canon D60Users also looked at:
Turn the manual focusing ring on the lens...
until the subject appears sharp in the viewfinder......
Set the lens focus mode switch to < MF > (or < M > on older lenses......
If you press and hold the shutter button down halfway as you focus manually...
icon appears on the LCD panel......
you will see the AF point where the subject is focused, and the focus confirma- tion light < ●> will light......
During manual focus, the beeper will not sound even when focus is achieved......
Select < > mode to manually set the aperture value...In low-light conditions against a background such as a night sky, you can use automatic slow-sync settings to properly expose the main subject and the background...The main subject is captured by the flash, and the background is captured by time exposure using a slow shutter speed......
Select < > mode for full autoflash...The shutter speed and aperture value are determined automatically, just as in < (Full Auto) mode......
|