User Guide for Canon D60:
FE Lock
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
FE (flash exposure) Lock obtains and locks the correct flash exposure reading for any part of a subject...FE Lock is a function in the Creative zone......
icon in the...
Make sure the < viewfinder is on......
In the Creative zone, press the...
to pop up the built-in flash......
Focus on the subject you want to lock the...
flash exposure on......
Place the center AF point over the subject, and press the...
 |
User Guide for Canon D60Users also looked at:
Remove the front lens cap......
by turning them as shown by the arrows in the diagram......
and turn the lens as shown by the arrow until it clicks in place......
M > on older lenses), the autofocus will not operate and < > will be displayed on the LCD panel......
Remove the rear lens cap and the body cap...
Set the focus mode switch on the lens to < AF......
If the focus mode switch is set to < MF > (or...
Lens mount index...
Remove the caps......
Align the red dots on the lens and camera...
Attach the lens......
AF-assist beam not emitted...Camera's built-in AF-assist beam not emitted...Flash not fired......
Mirror lockup...
01 Unused...
0 → +/Disable 3...
Lens AF stop button Fn...Switch...
Disables the red flashing of the AF point......
Stop AF while button is pressed Operate AF while button is pressed Press button to start AE lock...
|