User Guide for Canon D60:
Full Auto Flash
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
Using the < > (Program AE) mode with E-TTL autoflash is described below...Regarding the operation of the 550EX, refer to the Speedlite's instructions......
MODE SELEC...
PILOT...
Make sure the 550EX Speedlite’s pilot lamp is on......
Focus the subject, and take the picture......
is...
Make sure the flash-ready indicator...
on, and check the shutter speed and aperture value before taking the picture......
 |
User Guide for Canon D60Users also looked at:
When the 550EX is set to C.Fn-3-1, the flash will not fire in the TTL autoflash mode......
With an EZ-, E-, EG-, ML-, or TL-series Speedlite set in the TTL or A-TTL autoflash mode...
the flash will not fire...The manual flash mode must be used (with Speedlites having a manual flash mode......
again......
taking while the LCD panel is illuminated, the illumination will continue...If you press a menu or image playback button, the illumination will turn off......
dial to select [On], then...press...
The LCD panel illumination will be enabled...
To turn off the illumination, press...
Illuminating the LCD panel...
Press the < MENU> button......
If you take a picture while the LCD panel is illuminated, the illumination will...
On the menu, select [LCD illumi.] and set the LCD panel illumina- tion......
If you operate a button or dial for picture...
|