User Guide for Vivitar 5340s:
Formatting an SD Memory Card or Internal Memory
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
The term “Formatting” means preparing an “SD Memory Card” to record images; this process is also called “initialization...This utility formats the internal memory (or memory card) and erases all stored images and data......
2...3...Use or to select [YES], then press the OK button to confirm......
FORMAT...
AUTO...
DATE...
FORMAT SELECT PAGE: SELECT ITEM...
NO...
YES NO...
When you format an SD memory card, be aware that all data of which will be permanently erased...Otherwise, you will format the memory card...An SD memory card having any problem cannot be properly formatted......
 |
User Guide for Vivitar 5340sUsers also looked at:
A indicator is displayed on the monitor screen......
In this mode, Vivicam 5340s automatically changes the exposure within a set range to take three shots after you press the shutter button once...AEB settings can be combined with exposure compensation settings to extend the adjustment range......
1...Press , then use to select the [FUNCTION] menu...Use to select [CAPTURE MODE], then press the OK button......
In AEB mode, the flash mode will be set to OFF automatically......
The 6...Press the shutter button to shoot......
4...5...To exit from the menu, press the...
A ], then press the OK button......
In this mode, Flash mode will be set to (Forced Flash) automatically......
Note for the following functions according to the desired scene from a menu...
The Flash mode will be set to (Flash Off......
Vivicam 5340s will automatically adjust the focus and exposure depending on the settings of ISO sensitivity and White Balance......
To use the SCENE mode, follow the steps below...
In the [PLAY] menu, set which settings are to be used for playback......
Changes the size of a recorded image...2560 x 1920 * 2048 x 1536 * 1280 x 960 * 640 x 480 * EXIT CHANGE LOGO Allows you to specify one of your recorded images as your setup screen image, which will be displayed on the monitor whenever you press the button to turn on...
|