User Guide for Vivitar 5340s:
Using the Flash
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
The flash is designed to function automatically when lighting conditions warrant the use of flash...You can take an image using a desired flash mode to suit your circumstances......
2...Use , , , or to select the desired flash mode, then press the OK button...Compose your scene and press the shutter button......
Vivicam 5340s has four flash modes: Red Eye, No Flash(default), Auto Flash and Forced Flash...The table below will help you to choose the appropriate flash mode...
 |
User Guide for Vivitar 5340sUsers also looked at:
2...Press the MODE button to access in [ , , or , then press the OK button......
the display changes in the...
PLAY)] mode with...
Pressing switches the LCD monitor display mode...Each time you press following order: Standard display Detailed display No information......
If there is no image stored in the internal memory or on the memory card...NO PICTURE] message will appear on the monitor......
3...To view the previous image, press the button...To view the next image, press the button......
Sets whether or not to mute the startup sound and camera sound each time you press the camera button...ON/OFF...
BASIC Settings...
Sets video output system of the video equipment that you are going to connect to Vivicam 5340s...PAL / NTSC...
If no operation is performed for a specific period of time, the power to Vivicam 5340s is automatically turned off...OFF / 3MIN...10MIN......
Returns all basic settings to Vivicam 5340s’ default settings...The time setting will not be reset...YES/NO...
|