User Guide for Vivitar 5340s:
APPENDIX
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
Troubleshooting Guide...
Symptom Power does not turn on...
Possible causes * The battery has run out...The battery cover is not closed properly...The AC power adapter (optional) is disconnected......
Solutions / Corrective Actions * Load new or fully charged battery...Properly connect the AC power adapter...Charge the battery......
SLEEP] in BASIC menu of SETUP mode activated...Vivicam 5340s is in PLAY mode...Memory is full......
 |
User Guide for Vivitar 5340sUsers also looked at:
CAPTURE MODE SELECT PAGE: SELECT ITEM...
AEB...
The indicator is displayed on the monitor screen...7...Shooting will stop when the shutter button is released......
S...
CAPTURE MODE...
SINGLE...
This mode is used for continuous capture...Images are taken continuously while the shutter release button is pressed......
1...Use to select [CAPTURE MODE], then press the OK button...To exit from the menu, press the...
CONTINUOUS...
Maximum number of continuous shots: 10 In Continuous mode, the flash mode will be set to OFF automatically......
This menu is for the basic settings to be used when capturing still images in camera mode......
SELECT PAGE: SELECT ITEM...
5M...
PICTURE FUNCTION AE/AWB PICTURE FUNCTION AE/AWB PICTURE FUNCTION AE/AWB...
Sets to obtain the correct exposure when the subject is much brighter or darker than the background...The EV compensation value can be set in the range from –2.0EV to +2.0EV......
|