User Guide for Panasonic AW-PH500:
∫Installation procedure
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
How to attain camera balance...
Be absolutely sure to follow the steps below to attain the camera balance when installing the camera on the pan/tilt head......
1...Position the pan/tilt head so that its tilt axis is on the horizontal, and attach the camera arm......
2...Position the camera using the balance points...
specified in the camera’s manual as a guideline, and use the screw to secure...If the balance points are not specified, to position the camera, use the point where the center of gravity in the perpendicular direction of the camera with its attached lens is aligned with the tilt rotary axis, and use the screw to secure......
 |
User Guide for Panasonic AW-PH500Users also looked at:
Do not use your hands to turn the rotating parts......
camera to be mounted on it, and select a flat and level location where the pan/tilt head can be firmly secured...Secure the pan/tilt head firmly so that it will not shake, rock or wobble whether it is stationary or rotating...Read through the installation procedure and install the pan/tilt head securely......
The maximum power which can be supplied to the camera is 2 A (DC 12 V......
To supply power to the pan/tilt head, be sure to use only the AW-PS505 AC adapter designed exclusively for this pan/tilt...
rotational range of the pan/tilt head......
No screws for attaching the pan/tilt head are provided with the pan/tilt head...Select the screws to be used by giving due...
weight of its lens cannot be used......
above +60 oC since doing so will give rise to instability in the operation of the pan/tilt head......
head......
Doing so may cause malfunctioning......
consideration to the location where the pan/tilt head is to be attached and the weight of the camera which will be mounted on the pan/tilt head......
Do not install the pan/tilt head in an extremely hot or cold location where the temperature will drop below –20 oC or rise...
Before checking the pan/tilt head’s operations and actually using it, always check to ensure that nobody is within the...
|