Recently Visited Products



User Guide for Panasonic AW-PH500: 

∫When using the control panel

This document also applies to:


Looking for a manual? Find it here...


Chapter Summary: Standard connections... Max...distance of 500 meters (when extended) between pan/tilt head and pan-tilt control panel (monitor, G/L source... Lens zoom / focus cable... ENG camera... Zoom lens... Video camera control cable AW-CA16U10 (10 meters) AW-CA16U20 (20 meters) AW-CA16U30 (30 meters... Pan/tilt head control cable AW-CA24U10 (10 meters) AW-CA24U20 (20 meters) AW-CA24U30 (30 meters... AW-PH500 Pan/tilt head for ENG applications...


User Guide for Panasonic AW-PH500

Users also looked at:

Camera mounting board anchoring screws (a2) ≥ Flat washers (a2) ≥ Spring washers (a2... Rotary arm (a1) ≥ Rotary arm anchoring screws (a8) ≥ Rotary arm anchoring flat washer (a8) ≥ Rotary arm anchoring spring washer (a8...

Not used... 8 GND... Power control input... Data transmitted from pan/tilt head (RS-232C... GND... PR OUT... 17 RXD232... 10 PR OUT... 4 GND... 11 GND... To the G/L OUT connector on the control panel or hub... 18 DGND... Pin No...Signal... This connector is connected to the PAN/TILT CONTROL OUT connector on the control panel (AW-RP301, AW-RP501 or AW-RP505) or multi-port hub (AW-HB505...For connection, use one of the optional cables listed below...... 16 NC... Rightward direction control input (contact signal... PB OUT... 15 DGND... 10 meters: AW-CA16U10... The pan/tilt head control cable is connected here...... 1 DI UP... Camera Y signal output... 14 NC... Contact control signals are not connected to this cable......

This "User Guide" also applies to the following products: