User Guide for Panasonic AW-PH500
Users also looked at:
Camera mounting board anchoring screws (a2) ≥ Flat washers (a2) ≥ Spring washers (a2...
Rotary arm (a1) ≥ Rotary arm anchoring screws (a8) ≥ Rotary arm anchoring flat washer (a8) ≥ Rotary arm anchoring spring washer (a8...
G/L OUT connector (BNC...
The G/L signals sent from the controller are output from this connector which is connected to the G/L input connector on the camera......
This connector is connected to the video signal connector on the camera...1 V [p-p]/75 h...
These holes are used for anchoring the pan/tilt head when it is installed......
2 Pedestal...
Cannon...
7 Holes for attaching the pan/tilt head...
This output connector is used to perform ON/OFF control for the motorized ND filter, the ND filter of a lens with a built-in motorized extender and the lens extender...The R03-P6M or R03- PB6M connector made by Tajimi Electronics Co., Ltd...ND signal B : ND return F A C : EXT signal D : EXT return B E E : GND F : VCC (+15 V) D C...
