User Guide for Panasonic AW-PH500:
Safety precautions
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
CAUTION...
RISK OF ELECTRIC SHOCK DO NOT OPEN...
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK...NO USER SERVICEABLE PARTS INSIDE...REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL......
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons......
 |
User Guide for Panasonic AW-PH500Users also looked at:
Max...distance of 500 meters (when extended) between pan/tilt head and controller (monitor, G/L source...
for directions on how to connect the pan/tilt head control cable and RS-232C cable......
controlled from the control panel...In this case, the connections between the control panel and pan/tilt head and between the camera and pan/tilt head are the same as described in the section entitled “When the AW-F575 is used as the camera to be installed” under “When using the control panel...
To extend the cable to a length exceeding 15 meters, convert the interface from RS-232C to RS-422 for sending, and convert it back to RS-232C at the receiving end......
control the pan/tilt head...
Refer to the connections with the PC in the section entitled “When using the RS-232C interface to control the pan/tilt head...
If a hybrid panel is used as the control panel when the AW-F575 is to be used as the ENG camera, the camera can be...
Shown below are the connections for the RS-232C cable from the PC and for the cable from the pan/tilt head when control is to be exercised using the RS-232C interface......
|