User Guide for Panasonic AW-PH500: 

Operating precautions

This document also applies to:


Looking for a manual? Find it here...


Chapter Summary: In addition to the “Safety precautions,” please heed the precautions described below...Be absolutely sure to remove this battery when the pan/tilt head is to be scrapped or its printed circuit board is to be scrapped...Do not dispose of this battery as household garbage......


User Guide for Panasonic AW-PH500

Users also looked at:

TaD... Pan/tilt head control cable AW-CA24U10 (10 meters... Lens zoom/focus cable... RS-232C connector... PC 9-pin D-sub connector... convert it back to RS-232C at the receiving end...... 5 GND... The camera cannot be controlled using the RS-232C interface...... Shown below are the connections for the RS-232C cable from the PC and for the cable from the pan/tilt head when control is to be exercised using the RS-232C interface...... PC... To the pan/tilt head pan-tilt control connector (24-pin... AW-CA24U10... Keep the length of the cable between the pan/tilt head and PC to less than 15 meters......

This "User Guide" also applies to the following products: