User Guide for Panasonic AW-PH500:
Parts and their functions
This document also applies to:
Chapter Summary:
1 Rotary head...
This rotates in the panning direction......
8 Lens I/F connector (12-pin round...
This connector is used to control the zooming and focusing of the motorized lens unit......
2 Pedestal...
3 Rotary arm...
The ENG camera is mounted on this arm...The arm rotates in the tilting direction......
4 Grip...
This is where the pan/tilt head is held...Use it to carry the pan/tilt head from one place to another or pick it up when installing it......
|
|
User Guide for Panasonic AW-PH500
Users also looked at:
The pan/tilt head can be controlled directly from the AW-RP501 hybrid control panel...When the AW-RP305 multi-control panel or AW-RP505 multi-hybrid control panel is used, up to five pan/tilt heads can be...
This stand-alone indoor pan/tilt head for ENG applications enables the camera to be turned 95 degrees upward, 95...
from the panel......
exercised using the RS-232C interface......
degrees downward and 300 degrees on the horizontal......
Control can be exercised using a contact-type controller......
A total weight of 15 kg including the camera and lens can be supported...Direct control can be exercised from the AW-RP301 pan-tilt control panel...However, the camera itself cannot be controlled...
Control can be exercised from a PC, etc...using the RS-232C interface...Up to 50 points can be preset when control is...
controlled directly through the AW-HB505 multi-port hub...However, the camera itself cannot be controlled from the AW- RP305......
|
This "User Guide" also applies to the following products:
