Instruction Manual for Canon ZR90:
Zooming
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
The camcorder automatically switches between optical zooming and digital zooming...Image resolution is slightly lower with the digital zoom...
Zoom in...
Zoom out...
Zoom lever...
MENU button...
SET dial...
Optical Zoom...
22× optical zoom...
20× optical zoom...
18× optical zoom...
Move the zoom lever toward W to zoom out (wide- angle...Move it toward T to zoom in (telephoto......
Press the zoom lever slightly for a slow zoom...Press harder for a faster zoom......
 |
Instruction Manual for Canon ZR80 / ZR85 / ZR90Users also looked at:
AE SHIFT button...
in 0.25 intervals (excluding –1.75 and +1.75......
The camcorder retains the setting even if you turn it off or change the program AE mode......
If “MF” is displayed in light blue, AE shift cannot be adjusted...Press the AE SHIFT button again to display “AE ±0” in light blue......
Auto, Sports, Portrait or Low...
3...Press the AE SHIFT button......
AE ±0” appears in light blue......
Turn the SET dial up to lighten the image and down to darken the image......
2...Set the program AE mode to Light mode......
You can adjust the AE (auto exposure) function to lighten or darken the image...This allows you to compensate for backlit or overexposed scenes...Available Levels: –2 to +2...
4...Turn the SET dial to adjust the AE shift level......
2...Set the camcorder to PLAY (VCR) mode and load a blank cassette...
5...Connected device: Play back the tape......
Recommended paper size...
Borders...
1...In the print setting menu, turn the SET dial to select [PAPER] and press the SET dial......
|