Instruction Manual for Canon ZR90:
Playing Back a Tape
This document also applies to:
Chapter Summary:
If the playback picture is distorted, clean the video heads using a Canon Head Cleaning Cassette or a commercially available digital video head-cleaning cassette...
1...Set the camcorder to PLAY (VCR) mode......
Set the POWER switch to PLAY (VCR) and the TAPE/CARD switch to...
Set the POWER switch to PLAY...
VCR......
2...Open the LCD panel......
You can also close the LCD panel with the screen facing outward......
|
|
Instruction Manual for Canon ZR80 / ZR85 / ZR90
Users also looked at:
You can also connect a VCR with S (S1)-VIDEO terminal ( 37......
For normal use, set [AV\DV OUT] to [OFF...If it is set to [ON], digital signals...
not be able to transfer converted signals via the DV terminal......
terminal...The DV terminal serves as output terminal only...
By connecting the camcorder to a VCR or 8mm video camcorder, you can convert analog video/audio signals to digital signals and output the digital signals via the DV...
You can also press the AV\DV button on the wireless controller...The setting changes with each press of the button......
Open the menu and select [VCR SETUP...Select [AV\DV OUT], set it to [ON] and close the menu......
Depending on the software and the specifications of your computer, you may...
AV DV OUT••••OFF...
cannot be input via the camcorder’s DV terminal......
Turning On the Analog-Digital Converter...
|
This "Instruction Manual" also applies to the following products:
