Instruction Manual for Canon ZR90:
Playing Back on a TV Screen
This document also applies to:
Chapter Summary:
The AV terminal also serves as headphones terminal...When "H" is displayed on the screen, change the setting following the procedure below......
Open the menu and select [VCR SETUP...Select [AV/PHONES H ], set it to [AV] and close the menu......
TVs with Audio/Video Terminals...
Refer also to the TV or VCR instruction manual......
Signal flow...
VIDEO...
AUDIO...
STV-250N Stereo Video Cable (supplied...
1...Turn off all devices before starting the connections...
|
|
Instruction Manual for Canon ZR80 / ZR85 / ZR90
Users also looked at:
the subject you wish into sharp focus...When the program selector is set to [, the Focus-Priority becomes set to ON (only the...
The focusing point returns to the center if you turn off the camcorder, change...
The subject you wish to record is not always in the center of the screen...In the Focus- Priority mode, you can choose from one of three focusing points to automatically put...
When you operate the zoom lever, the frames other than the selected one...
the size of the subject or the distance, the camcorder may focus outside the frame......
The focusing point cannot be selected in the following cases...
FOCUS PRI.•••ON...
When using the digital zoom...When you return to the optical zoom range, the focusing frame reappears...In Stitch Assist mode......
The focusing frame gives an indication of the focusing point...Depending on...
from CARD CAMERA mode or move the program selector to......
Turn off the Focus-Priority mode if you wish to put timing ahead of focus......
|
This "Instruction Manual" also applies to the following products:
