Instruction Manual for Canon ZR90:
Adjusting the Focus Manually
This document also applies to:
Chapter Summary:
Autofocus may not work well on the following subjects...In such case, focus manually......
Subjects with low contrast or without vertical lines...
Reflective surfaces...
Through dirty or wet windows...
Fast Moving Subjects...
FOCUS button...
2...Adjust the zoom......
When you operate the zoom after adjusting the focus, the subject may not stay in focus...Adjust the zoom before the focus......
3...Press the FOCUS button......
|
|
Instruction Manual for Canon ZR80 / ZR85 / ZR90
Users also looked at:
72×/360× digital zoom...
You can also use the T and W buttons on the wireless controller...However, you cannot control the zoom speed......
PLAY (VCR) CARD PLAY...
5...Press the MENU button to close the menu...
Digital Zoom...
Zoom lever...
Optical Zoom...
4...Turn the SET dial to select a setting option......
Move the zoom lever toward W to zoom out (wide- angle...Move it toward T to zoom in (telephoto......
Digital zoom cannot be used in the Night modes...A zoom indicator appears for 4 seconds...It extends in light blue when the...
88×/440× digital zoom 80×/400× digital zoom (88× in CARD CAMERA mode) (80× in CARD CAMERA mode...
MENU button...
subject as close as 0.39 in...1 cm......
D.ZOOM•••••••88X CAMERA SETUP...
18× optical zoom...
20× optical zoom...
The camcorder automatically switches between optical zooming and digital zooming...Image resolution is slightly lower with the digital zoom...
|
This "Instruction Manual" also applies to the following products:
