Instruction Manual for Canon ZR90:
Setting the White Balance
This document also applies to:
Chapter Summary:
You can use the preset modes to reproduce colors more accurately, or set a custom white balance to obtain the optimal setting......
AUTO Auto white balance...
SET W Custom white balance setting...
INDOOR T...
Use this mode for recording under changing lighting condition, video lights or sodium lamps......
OUTDOOR U Use this mode for recording night scenes, fireworks, sunrise or sunset......
White sheet or paper...
|
|
Instruction Manual for Canon ZR80 / ZR85 / ZR90
Users also looked at:
You can turn off the volume completely by turning the SET dial down until [OFF] appears...Turn the SET dial up to increase the volume again......
AV/PHONES ••AV...
Turn the SET dial up to increase the volume, and down to lower the volume......
Adjusting the Volume...
AV...
The headphones terminal also serves as AV terminal...Headphones can only be used when "H" is displayed on the screen...If not, change the setting following the...
Open the menu and select [VCR SETUP...Select [AV/PHONES H ], set it to [PHONES H ] and close the menu......
Built-in speaker...
The built-in speaker does not sound when “H” is displayed...Do not connect headphones unless “H” is displayed as it produces noise......
A volume bar appears for 2 seconds......
CAMERA CARD CAMERA...
procedure below......
H (phones) terminal...
When Using Headphones...
PLAY (VCR) CARD CAMERA...
|
This "Instruction Manual" also applies to the following products:
