Instruction Manual for Canon ZR90:
Magnifying the Image
This document also applies to:
Chapter Summary:
The playback image can be magnified up to 5 times...
1...Move the zoom lever toward T......
The image is magnified by 2 times...A frame appears indicating the position of the magnified area......
To further enlarge the image, move the zoom lever toward T......
To shrink the image below 2 times magnification, move the...
zoom lever toward W......
2...Selected the magnified area with the SET dial......
Turn the SET dial to move the image to the right and left, or up...
|
|
Instruction Manual for Canon ZR80 / ZR85 / ZR90
Users also looked at:
from the tape to a computer...Refer to the instruction manual of the software......
4-pin...
specifications/settings of your computer......
DV terminal...
while it is connected to the computer......
Operation may not work correctly depending on the software and the...
6-pin...
The image files on your memory card and the image files saved on the hard disk drive of your computer are valuable, original data files...If you wish to use image files on your computer, make copies of them first, and use the copied file, retaining the original......
You can transfer recordings to a computer equipped with a DV (IEEE1394) terminal or IEEE1394 capture board...Optional software is required for transferring recordings...
If the computer freezes while you have connected the camcorder, disconnect...
IEEE1394 (DV) terminal...
We recommend powering the camcorder from a household power source...
and reconnect the DV cable...If the problem persists, disconnect the interface cable, turn off camcorder and computer, turn camcorder and computer back on and reconnect them......
|
This "Instruction Manual" also applies to the following products:
