Instruction Manual for Canon ZR90:
Displaying the Data Code
This document also applies to:
Chapter Summary:
The camcorder maintains a data code containing recording date and time and other camera data such as shutter speed and exposure (f-stop...When you play back a tape...
you can display the data code and select the data code combination you wish to display......
DATA CODE button...
Selecting the Date/Time Display Combination...
D/TIME SEL.••DATE & TIME...
Open the menu and select [DISPLAY SETUP/ to [DATE] or [TIME] and close the menu......
|
|
Instruction Manual for Canon ZR80 / ZR85 / ZR90
Users also looked at:
STV-250N Stereo Video Cable (supplied...
Open the menu and select [VCR SETUP...Select [AV\DV OUT], set it to [ON] and close the menu......
Depending on the software and the specifications of your computer, you may...
By connecting the camcorder to a VCR or 8mm video camcorder, you can convert analog video/audio signals to digital signals and output the digital signals via the DV...
Headphones cannot be used during analog-digital conversion...Depending on the signal sent from the connected device, the conversion from...
You can also connect a VCR with S (S1)-VIDEO terminal ( 37......
Turn off all devices before starting the connections...Unload the tape from the camcorder...Refer also to the instruction manual of the connected device......
terminal...The DV terminal serves as output terminal only...
You can also press the AV\DV button on the wireless controller...The setting changes with each press of the button......
|
This "Instruction Manual" also applies to the following products:
