Instruction Manual for Canon ZR90:
Recording from Analog Video Devices (VCR, TV or Camcorder)
This document also applies to:
Chapter Summary:
You can record videos or TV programs from a VCR or analog camcorder on the tape in the camcorder......
1...Connect the camcorder to the analog video device......
2...Set the camcorder to PLAY (VCR) mode and load a blank cassette...
3...Connected device: Load the recorded cassette......
4...Press the REC PAUSE button......
In record pause mode and during recording, you can check the picture on the screen......
|
|
Instruction Manual for Canon ZR80 / ZR85 / ZR90
Users also looked at:
5...Press the MENU button to close the menu......
T.ZONE/DST•••N.Y......
D/TIME SET•••JAN...1,2004 12:00 PM...
No......
SYSTEM...
Displaying Date and Time during Recording...
You can display the date and time in the lower left corner of the screen...
2...Turn the SET dial to select [DISPLAY SETUP/ press the SET dial......
D/T DISPLAY••OFF...
5...Turn the SET dial to select [D/TIME SET] and press the SET dial......
The year display starts to flash......
The time zone setting appears (see table on the next page...The default setting is New York......
Set the time zone, date and time when you first start using your camcorder, or when you have replaced the backup battery......
3...Turn the SET dial to select [D/T DISPLAY] and press the SET dial......
The next part of the display starts flashing...Set the month, day, hours and minutes in the same way......
|
This "Instruction Manual" also applies to the following products:
