Instruction Manual for Canon ZR90:
Replacing Existing Scenes (AV Insert)
This document also applies to:
Chapter Summary:
You can insert and replace images and audio on the tape of the camcorder with images and audio from other video devices connected via AV terminal or DV terminal......
Scene to be inserted...
Playback tape...
Insert start Insert end...
Tape in the camcorder before inserting...
Tape in the camcorder after inserting...
Inserted scene...
1...Connect the camcorder to a video device......
2...Connected device: Load a recorded cassette...Locate the scene you wish to insert and pause playback shortly before the scene......
|
|
Instruction Manual for Canon ZR80 / ZR85 / ZR90
Users also looked at:
MENU button SET dial...
NIGHT MODE button...
Allows you to record in dark places where lights cannot be used, without sacrificing color...Allows you to record in very dark places...The assist lamp (white LED) lights up automatically responding to the surrounding brightness......
NIGHT MODE••• NIGHT...
Pressing the NIGHT MODE button again resets the camcorder to the Auto mode......
1...Open the menu and select [CAMERA SETUP...Press the NIGHT MODE button......
activated......
The program AE mode cannot be changed while a Night mode is activated......
appears...Pressing the NIGHT MODE button again resets the camcorder to the Auto mode......
Digital zoom and multi-image screen cannot be used while a Night mode is...
NIGHT...
NIGHT+ SUPER NIGHT...
1...2...Press the NIGHT MODE button......
The symbol of the selected mode appears on the screen......
focus manually......
Moving subjects may leave a trailing afterimage...White points may appear on the screen...In such case, adjust the...
Connecting the Devices...
If you are connecting via AV terminal, check the setting ( 36......
|
This "Instruction Manual" also applies to the following products:
