Instruction Manual for Canon ZR90:
Loading/Unloading a Cassette
This document also applies to:
Chapter Summary:
Use only videocassettes marked with the D logo......
1...Slide and hold the OPEN/EJECT switch and open the cassette compartment cover......
Tape protection tab...
The cassette compartment opens automatically...
2...Load/unload the cassette......
Load the cassette with the window facing the grip belt...Unload the cassette by pulling it straight...
out......
3...Press the P mark on the cassette compartment until it clicks......
|
|
Instruction Manual for Canon ZR80 / ZR85 / ZR90
Users also looked at:
4...Press the PAUSE a button on the wireless controller......
12bit AUDIO•••STEREO1...
The camcorder resets to [STEREO 1] when you turn the camcorder off......
Dubbing...
6...Press the PAUSE a button on the wireless controller to begin dubbing...
Audio device: Stop playback......
2...If you have selected [MIX/VARI.], adjust the mix level: Open the menu and select [AUDIO SETUP...Select [MIX BALANCE], adjust the balance with the SET dial and close the menu......
Playing Back the Added Sound...
1...Open the menu and select [AUDIO SETUP...Select [12bit AUDIO], select a setting and close the menu......
Plays back stereo 1 and stereo 2 in the same level......
5...Press the AUDIO DUB...button on the wireless controller......
However, the mix balance is memorized by the camcorder......
You cannot use the DV terminal for audio dubbing...If you add sound to a tape not recorded with this camcorder, sound quality...
|
This "Instruction Manual" also applies to the following products:
