Instruction Manual for Canon ZR90:
Playing Back a Memory Card
This document also applies to:
Chapter Summary:
You can display a single image, 6 at one time (index screen 107), or one after another (slide show 107...Use the Card Jump function to quickly locate an image...
without displaying them one by one ( 108......
CARD – button...
CARD + button...
3 button...
e/a button...
SLIDE SHOW button...
1...Set the camcorder to CARD PLAY mode......
2...Press the CARD +/– button to move between images......
3...To play back a movie, press the e/a button......
|
|
Instruction Manual for Canon ZR80 / ZR85 / ZR90
Users also looked at:
Operation may not work correctly depending on the software and the...
Users of Windows XP can use the DV Network Software contained on the DIGITAL VIDEO SOLUTION DISK For Windows...For details, refer to the DV Network Software Instruction Manual......
You can transfer recordings to a computer equipped with a DV (IEEE1394) terminal or IEEE1394 capture board...Optional software is required for transferring recordings...
The image files on your memory card and the image files saved on the hard disk drive of your computer are valuable, original data files...If you wish to use image files on your computer, make copies of them first, and use the copied file, retaining the original......
4-pin...
If the computer freezes while you have connected the camcorder, disconnect...
while it is connected to the computer......
from the tape to a computer...Refer to the instruction manual of the software......
|
This "Instruction Manual" also applies to the following products:
