Instruction Manual for Canon ZR90:
Connecting to a Computer Using a USB Cable
This document also applies to:
Chapter Summary:
You can download images from the memory card to a computer using the supplied USB cable...
PC CONNECT ” appears to indicate that the camcorder is connected to the computer via USB cable......
Do not disconnect the USB cable, open the memory card cover, remove the...
memory card, change the position of the TAPE/CARD switch or turn off the camcorder and computer while data is being transferred to the computer (while the camcorder's card access indicator is flashing...Doing so may damage the memory card’s data......
|
|
Instruction Manual for Canon ZR80 / ZR85 / ZR90
Users also looked at:
AV...
Built-in speaker...
AV/PHONES ••AV...
When Using Headphones...
Adjusting the Volume...
PLAY (VCR) CARD CAMERA...
CAMERA CARD CAMERA...
Open the menu and select [VCR SETUP...Select [AV/PHONES H ], set it to [PHONES H ] and close the menu......
VCR SETUP...
procedure below......
A volume bar appears for 2 seconds......
The built-in speaker does not sound when “H” is displayed...Do not connect headphones unless “H” is displayed as it produces noise......
When you use the LCD screen for playback, the camcorder plays back the sound via built-in speaker...The built-in speaker does not sound when you close the LCD panel......
Turn the SET dial up to increase the volume, and down to lower the volume......
H (phones) terminal...
The headphones terminal also serves as AV terminal...Headphones can only be used when "H" is displayed on the screen...If not, change the setting following the...
You can turn off the volume completely by turning the SET dial down until [OFF] appears...Turn the SET dial up to increase the volume again......
PLAY(VCR...
|
This "Instruction Manual" also applies to the following products:
