Instruction Manual for JVC GR-DV5000AG:
VIDEO PLAYBACK
This document also applies to:
Chapter Summary:
Clean the video heads using an optional dry...
cleaning cassette when: • No picture during playback...For details, pg...76......
If Stop mode continues for 5 minutes when power...
is supplied from a battery, the camcorder shuts off automatically...To turn on again, set the Power Switch to “OFF”, then to “PLAY......
The playback picture can be viewed in the LCD...
monitor, viewfinder or on a connected TV...pg...22...
|
|
Instruction Manual for JVC GR-DV4000 / GR-DV5000
Users also looked at:
2 While holding A...DUB (D) on the remote...
Stereo Microphone...
When editing onto a tape that was recorded at...
To perform Audio Dubbing with a video unit...
control, press PAUSE (9...The “9D” and “MIC” indicators appear......
STOP...
into the microphone......
connected to the camcorder’s AV connector, first set “S/AV INPUT” to “ON” in VIDEO Menu...pg...31, 40) The “AUX” indication appears instead of “MIC...
television, make connections...pg...22...
If you change from 12-bit to 16-bit in mid...
Connect optional headphones to the headphone connector or use the AV connector, and set the “12bit MODE” to the desired mode; • “SOUND 1” for the playback sound...SOUND 2” for the dubbed sound...MIX” for the playback and dubbed sound......
recording and then use the tape for Audio Dubbing, it is not effective from the point where 16-bit recording began......
|
This "Instruction Manual" also applies to the following products:
