Instruction Manual for JVC GR-DV5000AG:
Viewfinder Adjustment
This document also applies to:
Chapter Summary:
1 Set the Power Switch to “A” or “M” while...
pressing down the Lock Button located on the switch......
2 Make sure the LCD monitor is closed and locked...
Pull out the viewfinder fully and adjust it manually for best viewability......
3 Turn the Dioptre Adjustment Control until the...
indications in the viewfinder are clearly focused......
PAUSE...
Dioptre Adjustment Control...
CAUTION...
When retracting the viewfinder, take care not to pinch your fingers...
|
|
Instruction Manual for JVC GR-DV4000 / GR-DV5000
Users also looked at:
8 Press 4/9 on the camcorder to start playback of...
Repeat steps 8 – 10 for additional editing...Stop the VCR and camcorder......
3 Set the camcorder’s Power Switch to “PLAY...
VIDEO......
Refer to the instruction manual for the VCR......
5 Insert the source cassette in the camcorder......
54 EN...
Connect when your TV/VCR has an S-VIDEO IN/OUT connector...In this case, it is not necessary to connect the yellow video cable...When connecting the cable, open the cover......
1) Perform steps 1 to 3 in the left column...5) Press the Recording Start/Stop Button to engage the Record-Pause mode...The indication stops rotating......
B C D...
To use this camcorder as a recorder...
the source tape......
It is also possible to dub from another camcorder......
signals with this procedure......
camcorder and the VCR...Also refer to page 22......
6 Insert the recording cassette in the VCR......
A White to AUDIO L IN or OUT B Red to AUDIO R IN or OUT C Yellow to VIDEO IN or OUT D To S-VIDEO* IN or OUT...
|
This "Instruction Manual" also applies to the following products:
