Instruction Manual for JVC GR-DV5000AG:
Flash Brightness Adjustment
This document also applies to:
Chapter Summary:
When a snapshot ( pg...You can also adjust the flash brightness manually...When you find that the snapshots you took look too bright or too dark, adjust it manually......
1 Select “FLASH ADJ.” in MANUAL Menu, and...
press the MENU Wheel in......
The parameter appears......
2 To intensify the flash, rotate the MENU Wheel...
towards...To weaken the flash, rotate the MENU Wheel towards......
Adjustment range: –3 to +3......
|
|
Instruction Manual for JVC GR-DV4000 / GR-DV5000
Users also looked at:
8 To dub the image, press SNAPSHOT...
indication appears during dubbing......
If SNAPSHOT is pressed in step 8 when a memory...
MODE” ( pg...36) is dubbed to a memory card, the WIDE mode identifying signal is not dubbed with it......
If an image recorded on the tape using “WIDE...
7 At the point you want to dub, press 4/9 again to...
card is not loaded, the message “COPYING FAILED” is displayed......
COPY” to “ON...pg...31, 40...
Still images can be dubbed from a tape to a memory card......
6 Press 4/9 to start playback......
The selected image is stored in the memory...
card......
Images are dubbed in 640 x 480 pixels......
5 Set...
Power Switch Lock Button...
you wish to dub, perform up to step 8 using the remote control (provided...pg...58...
To use Playback Special effects with a video image...
engage Still Playback......
Wipe gently with a soft cloth...Be careful not to damage the monitor...Close the LCD monitor......
|
This "Instruction Manual" also applies to the following products:
